Remotes in GitHub
OverviewTeaching: 30 min
Exercises: 0 minQuestions
How do I share my changes with others on the web?Objectives
Explain what remote repositories are and why they are useful.
Push to or pull from a remote repository.
Version control really comes into its own when we begin to collaborate with other people. We already have most of the machinery we need to do this; the only thing missing is to copy changes from one repository to another.
Systems like Git allow us to move work between any two repositories. In practice, though, it’s easiest to use one copy as a central hub, and to keep it on the web rather than on someone’s laptop. Most programmers use hosting services like GitHub, BitBucket or GitLab to hold those master copies; we’ll explore the pros and cons of this in the final section of this lesson.
Let’s start by sharing the changes we’ve made to our current project with the
world. Log in to GitHub, then click on the icon in the top right corner to
create a new repository called
Name your repository “planets” and then click “Create Repository”:
As soon as the repository is created, GitHub displays a page with a URL and some information on how to configure your local repository:
This effectively does the following on GitHub’s servers:
$ mkdir planets $ cd planets $ git init
If you remember back to the earlier lesson where we added and
commited our earlier work on
mars.txt, we had a diagram of the local repository
which looked like this:
Now that we have two repositories, we need a diagram like this:
Note that our local repository still contains our earlier work on
mars.txt, but the
remote repository on GitHub appears empty as it doesn’t contain any files yet.
The next step is to connect the two repositories. We do this by making the GitHub repository a remote for the local repository. The home page of the repository on GitHub includes the string we need to identify it:
Click on the ‘HTTPS’ link to change the protocol from SSH to HTTPS.
HTTPS vs. SSH
We use HTTPS here because it does not require additional configuration. After the workshop you may want to set up SSH access, which is a bit more secure, by following one of the great tutorials from GitHub, Atlassian/BitBucket and GitLab (this one has a screencast).
Copy that URL from the browser, go into the local
planets repository, and run
$ git remote add origin https://github.com/vlad/planets.git
Make sure to use the URL for your repository rather than Vlad’s: the only
difference should be your username instead of
We can check that the command has worked by running
git remote -v:
$ git remote -v
origin https://github.com/vlad/planets.git (push) origin https://github.com/vlad/planets.git (fetch)
origin is a local nickname for your remote repository. We could use
something else if we wanted to, but
origin is by far the most common choice.
Once the nickname
origin is set up, this command will push the changes from
our local repository to the repository on GitHub:
$ git push origin master
Counting objects: 9, done. Delta compression using up to 4 threads. Compressing objects: 100% (6/6), done. Writing objects: 100% (9/9), 821 bytes, done. Total 9 (delta 2), reused 0 (delta 0) To https://github.com/vlad/planets * [new branch] master -> master Branch master set up to track remote branch master from origin.
If the network you are connected to uses a proxy, there is a chance that your last command failed with “Could not resolve hostname” as the error message. To solve this issue, you need to tell Git about the proxy:
$ git config --global http.proxy http://user:email@example.com $ git config --global https.proxy http://user:firstname.lastname@example.org
When you connect to another network that doesn’t use a proxy, you will need to tell Git to disable the proxy using:
$ git config --global --unset http.proxy $ git config --global --unset https.proxy
If your operating system has a password manager configured,
git pushwill try to use it when it needs your username and password. For example, this is the default behavior for Git Bash on Windows. If you want to type your username and password at the terminal instead of using a password manager, type:
$ unset SSH_ASKPASS
in the terminal, before you run
git push. Despite the name, Git uses
SSH_ASKPASSfor all credential entry, so you may want to unset
SSH_ASKPASSwhether you are using Git via SSH or https.
You may also want to add
unset SSH_ASKPASSat the end of your
~/.bashrcto make Git default to using the terminal for usernames and passwords.
Our local and remote repositories are now in this state:
The ‘-u’ Flag
You may see a
-uoption used with
git pushin some documentation. This option is synonymous with the
--set-upstream-tooption for the
git branchcommand, and is used to associate the current branch with a remote branch so that the
git pullcommand can be used without any arguments. To do this, simply use
git push -u origin masteronce the remote has been set up.
We can pull changes from the remote repository to the local one as well:
$ git pull origin master
From https://github.com/vlad/planets * branch master -> FETCH_HEAD Already up-to-date.
Pulling has no effect in this case because the two repositories are already synchronized. If someone else had pushed some changes to the repository on GitHub, though, this command would download them to our local repository.
Browse to your
planetsrepository on GitHub. Under the Code tab, find and click on the text that says “XX commits” (where “XX” is some number). Hover over, and click on, the three buttons to the right of each commit. What information can you gather/explore from these buttons? How would you get that same information in the shell?
The left-most button (with the picture of a clipboard) copies the full identifier of the commit to the clipboard. In the shell,
git logwill show you the full commit identifier for each commit.
When you click on the middle button, you’ll see all of the changes that were made in that particular commit. Green shaded lines indicate additions and red ones removals. In the shell we can do the same thing with
git diff. In particular,
git diff ID1..ID2where ID1 and ID2 are commit identifiers (e.g.
git diff a3bf1e5..041e637) will show the differences between those two commits.
The right-most button lets you view all of the files in the repository at the time of that commit. To do this in the shell, we’d need to checkout the repository at that particular time. We can do this with
git checkout IDwhere ID is the identifier of the commit we want to look at. If we do this, we need to remember to put the repository back to the right state afterwards!
Create a remote repository on GitHub. Push the contents of your local repository to the remote. Make changes to your local repository and push these changes. Go to the repo you just created on GitHub and check the timestamps of the files. How does GitHub record times, and why?
GitHub displays timestamps in a human readable relative format (i.e. “22 hours ago” or “three weeks ago”). However, if you hover over the timestamp, you can see the exact time at which the last change to the file occurred.
Push vs. Commit
In this lesson, we introduced the “git push” command. How is “git push” different from “git commit”?
When we push changes, we’re interacting with a remote repository to update it with the changes we’ve made locally (often this corresponds to sharing the changes we’ve made with others). Commit only updates your local repository.
Fixing Remote Settings
It happens quite often in practice that you made a typo in the remote URL. This exercise is about how to fix this kind of issue. First start by adding a remote with an invalid URL:
git remote add broken https://github.com/this/url/is/invalid
Do you get an error when adding the remote? Can you think of a command that would make it obvious that your remote URL was not valid? Can you figure out how to fix the URL (tip: use
git remote -h)? Don’t forget to clean up and remove this remote once you are done with this exercise.
We don’t see any error message when we add the remote (adding the remote tells git about it, but doesn’t try to use it yet). As soon as we try to use
git pushwe’ll see an error message. The command
git remote set-urlallows us to change the remote’s URL to fix it.
GitHub License and README files
In this section we learned about creating a remote repository on GitHub, but when you initialized your GitHub repo, you didn’t add a README.md or a license file. If you had, what do you think would have happened when you tried to link your local and remote repositories?
In this case, we’d see a merge conflict due to unrelated histories. When Github creates a README.md file, it performs a commit in the remote repository. When you try to pull the remote repository to your local repository, Git detects that they have histories that do not share a common origin and refuses to merge.
$ git pull origin master
From https://github.com/vlad/planets * branch master -> FETCH_HEAD * [new branch] master -> origin/master fatal: refusing to merge unrelated histories
You can force git to merge the two repositories with the option
--allow-unrelated-histories. Be careful when you use this option and carefully examine the contents of local and remote repositories before merging.
$ git pull --allow-unrelated-histories origin master
From https://github.com/vlad/planets * branch master -> FETCH_HEAD Merge made by the 'recursive' strategy. README.md | 1 + 1 file changed, 1 insertion(+) create mode 100644 README.md
A local Git repository can be connected to one or more remote repositories.
Use the HTTPS protocol to connect to remote repositories until you have learned how to set up SSH.
git pushcopies changes from a local repository to a remote repository.
git pullcopies changes from a remote repository to a local repository.