Agent-Based Systems Resources
This pages focus on some resouces that is used for developing GenAI agent. All resources is divided into 4 catagories: Design, pre-process, in-situ monitoing and post-processing.
Design is an improtant part in AM. if the design, material selection, path planning is wrong, the product will be wrong
Material selcetion
Material selcetion is crucial part for AM. In the below we provide 8 material that are used in MAM based on differnt criterion
| S. No | Material | D (g/cm³) | MP (°C) | SP.H (J/(kgK)) | TYS (MPa) | MoE (GPa) | TC (W/(mK)) | Cost /Kg | BH | ER (lx-m) |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | H13 | 7.8 | 1427 | 460 | 1380 | 215 | 28.6 | 190 | 207 | 0.52 |
| 2 | 316L | 8 | 1400 | 500 | 170 | 193 | 16.3 | 380 | 217 | 0.74 |
| 3 | Ti6Al4V | 4.42 | 1649 | 560 | 910 | 114 | 7.2 | 1990 | 334 | 1.78 |
| 4 | AlSi12Cu2Fe | 2.67 | 585 | 963 | 140 | 74.5 | 180 | 650 | 100 | 0.075 |
| 5 | AlSi10Mg | 2.58 | 600 | 900 | 190 | 70 | 150 | 280 | 75 | 0.05943 |
| 6 | Inconel 718 | 8.192 | 1426 | 435 | 550 | 204.9 | 11.4 | 3000 | 363 | 1.182 |
| 7 | Hastelloy X | 8.22 | 1316 | 784 | 385 | 205 | 9.1 | 4000 | 230 | 1.18 |
| 8 | CuSn10 | 8.8 | 999 | 380 | 180 | 130 | 50 | 600 | 70 | 0.16 |
Here, Density(D), Melting point (MP), Specific heat (SP.H), Tensile strength (Yield) (TYS), Modulus of Elasticity (MoE), Thermal Conductivity (TC), Cost per Kg (Cost), Brinell hardness (BH) and Electrical resistivity (ER).
--> -->